The FabCore+ arrived!

FabCreator Machine FabCore Plus
1

And there it was, the long anticipated FabCore+!
The original location was no longer an option, so the lab in the attic it had to be.
After some lifting, turning and grunting, the machine was installed and cutting happily.

Big thanks to Bonne and his brother!

IMG_20210412_150707
IMG_20210412_1507071024×770 71.6 KB
IMG_20210412_150736
IMG_20210412_1507361024×1362 78.8 KB
IMG_20210412_150829
IMG_20210412_1508291024×768 52.5 KB
IMG_20210412_150833
IMG_20210412_1508331024×768 45.8 KB
IMG_20210412_150839
IMG_20210412_1508391024×768 45.8 KB
IMG_20210412_150929
IMG_20210412_1509291024×770 46.2 KB
IMG_20210412_160338
IMG_20210412_1603381024×1362 75 KB
IMG_20210412_165956
IMG_20210412_1659561024×770 67.7 KB

Now on to tuning this wonderful machine…

2 Likes
2

Nice, happy cutting! :wink:
Is the FabCorePlus kind of a pre-assembled FabKit?

3

Yes. I believe it is the FabKit Mk6, but assembled (and orange).

4

Indeed it is the same as the Fabkit Mk6 in all but frame :slight_smile: