Material stop Extension

Often I want to cut quickly and in a material-saving way. I have built a edge with the help of an aluminium profile. There I screw overlapping material and cut a line down at X 0.0 mm and a other down at Y 0.0 mm. This way I have a laydown edge and can place the material there precisely at X 0 and y= 0.

3 Likes

Useful jig. One detail worth checking before relying on it: the line cut at X0/Y0 marks the beam path, not necessarily the exact stop face, so the edge can be off by roughly half the kerf (or a full kerf depending which side you keep). A quick test cut against the stop and measuring the offset will tell you whether to shim or shift the profile.