Crafty results

Very happy with the Crafty lasercutter!

A cupholder for the boardgame table (12mm vuren, 5mm & 3mm plywood, and 3mm gold mirror acryl):

Some layered art (3mm plywood):

And the Enterprise, designed by JoeSnuffie (@thingyverse, I used 5mm plywood):

2 Likes

Some other projects:

For a wedding, we needed some boardgame figurines, a herald’s scroll and a sword. I mostly think in lasercutting solutions, and that seems to have worked out!

Implemented a burn offset of 0.1mm helps to put parts together tightly; this way the box didn’t even need glue :slight_smile: I used Boxes.py (this one) for the base box, and added some extra dividers.

Again, used Boxes.py for the base box (this one), with foam paper taped to a rounded stick; worked quite well!

Edited this 3axis file (doubt this is the original file) to make it larger, use 8mm plywood in the middle, and have some wider crossguards

A colorful staple, the coffee wall:

A dice box! I inlaid the top of the box with some shiny golden paper; I was surprised it wasn’t blown all over the place in the lasercutter while cutting it (cause only the edges were held down with magnets), and it looks quite cool.

And my favorite project so far (which needs some finishing touches): I added decor to my custom boardgame table :smiley:

2 Likes