# Material stop Extension

**URL:** <https://community.fabcreator.com/t/material-stop-extension/208>\
**Category:** What I made\
**Created:** [29 January 2023 22:04 UTC](https://community.fabcreator.com/t/material-stop-extension/208 "2023-01-29T22:04:19Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ploenne](https://community.fabcreator.com/letter_avatar_proxy/v4/letter/p/f0a364/32.png) [@ploenne](https://community.fabcreator.com/u/ploenne)\
**Post date:** [29 January 2023 22:04 UTC](https://community.fabcreator.com/t/material-stop-extension/208/1 "2023-01-29T22:04:19Z")

</div>

Often I want to cut quickly and in a material-saving way. I have built a edge with the help of an aluminium profile. There I screw overlapping material and cut a line down at X 0.0 mm and a other down at Y 0.0 mm. This way I have a laydown edge and can place the material there precisely at X 0 and y= 0.

 ![Bildschirmfoto 2023-01-29 um 23.01.06](https://community.fabcreator.com/uploads/default/original/1X/b1edd0ea5b03a39e1136a1c594e1081600f957ab.jpeg) ![Bildschirmfoto 2023-01-29 um 23.00.53](https://community.fabcreator.com/uploads/default/original/1X/871f02d036d2792b0b127f1a0f8eeacc3f844f7c.jpeg) ![Bildschirmfoto 2023-01-29 um 22.59.22](https://community.fabcreator.com/uploads/default/original/1X/7b9ae657ede2426fd77a532871b5ca1091eadd32.jpeg) ![Bildschirmfoto 2023-01-29 um 23.01.21](https://community.fabcreator.com/uploads/default/original/1X/e0ed9d5dc164d9df630b5bab37ea4ecd85a81710.jpeg)