# Fill vs. line cutting. Results in different dimensions!

**URL:** <https://community.fabcreator.com/t/fill-vs-line-cutting-results-in-different-dimensions/101>\
**Category:** FabKit\
**Created:** [27 February 2021 12:57 UTC](https://community.fabcreator.com/t/fill-vs-line-cutting-results-in-different-dimensions/101 "2021-02-27T12:57:30Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![egeltje](https://community.fabcreator.com/user_avatar/community.fabcreator.com/egeltje/32/50_2.png) [@egeltje](https://community.fabcreator.com/u/egeltje)\
**Post date:** [27 April 2021 15:41 UTC](https://community.fabcreator.com/t/fill-vs-line-cutting-results-in-different-dimensions/101/13 "2021-04-27T15:41:59Z")

</div>

As a follow-up and for future reference, I had to tweak a bit more (see the pictures of before and after). My line shifts are:

| speed | line shift | initial offset |
| --- | --- | --- |
| 100 mm/s | 1.475 | 0.00 |
| 200 mm/s | 2.825 | 0.00 |
| 300 mm/s | 4.150 | 0.00 |
| 400 mm/s | 5.450 | 0.00 |
| 500 mm/s | 6.750 | 0.00 |

I found these by trial and error and adjusting a tiny bit more or a tiny bit less  
(using cardboard for testing). I also attached the lightburn file I used.

 ![before](https://community.fabcreator.com/uploads/default/original/1X/a483aafeef3570fb5f7af8ebb6d4a4d4a089fbf4.jpeg)  
before (with @cmachtel 's numbers)

 ![after](https://community.fabcreator.com/uploads/default/original/1X/d0ddcf26e7f9e53d2af25bb5613a7470653656e3.jpeg)  
after

[line-offset.zip](https://community.fabcreator.com/uploads/short-url/vtg08Uo8zVUY5kvgESPDK7db6UH.zip) (29.7 KB)  
The test file with different speeds.

---

_[View the full topic](https://community.fabcreator.com/t/fill-vs-line-cutting-results-in-different-dimensions/101)._